1. 3- or 4-arm design, fully driven by hydraulic system, slew flexibly with wide working range. The arms are made of high tensile steel plate, large strength and lightweight.
2. Two optional operation modes: wireless remote control and cable remote control, easy to operate.
3. Inner-climbing frames: floor frames or wall (lift or shaft) frames, which are suitable for different jobsites.
4. Each move is controlled by electrohydraulic proportional valve, more stable and less impact.
5. The main electronic components are world-famous brand, with high quality and stable performance.
|Radius of placing boom (m)||27.7|
|Stationary height (to the join between the end of the boom and Swivel table) (m)||22.6|
|Slewing range (°)||360|
|Power of motor (KW)||11|
|Pressure of hydraulic system (MPa)||28|
|Type of hydraulic oil||H46|
|Three hydraulic foldable arms (m)||1st section||10.5|
|Boom articulation (°)||1st section||0～86|
|Interval of climbing frame (m)||Climbing||3.0～4.2|
|Delivery pipe specification||DN125|
|Delivery hose dimension (inside diameter×length) (mm)||5″×3000|
|Operation mode||Cable Remote Control|
|Radio Remote Control|
|Wind speed (m/s)||Placing concrete||≤13.8|
|Working temperature (°C)||-20 ~ 48|